The ageing constructions are in continuous need of protection in its exteriors Pro Painters Melbourne. Only new coats of paint are just to make the paint long-lasting. Appropriate preparation gets the job done, and the preparation modes are the exact six steps.

Six professional steps solve out the needs to paint the exteriors of the home property. In the end, external painting makes the property appear pleasing to the eye and adds value to the home.

Rightful Twelve Steps to a Successful Exterior Painting
In Melbourne, homeowners make sure their residential complexes are totally fine to suit their aesthetic tastes.

Step 1:

Pressure Washing the Walls

Painting has to be done throughout the entire wall surface, so ensuring overall and uniform coverage is mandatory. The topmost responsibility is removing the long buildup of dust and dirt. Using a pressure washer, the entire grime collection is washed off. Prior to exterior painting, pressure washing is done by following a technique – the washer is smoothly moved in straight lines from top to bottom of the exterior wall in a controlled and refined manner. Each stroke is overlapped by eight inches unless the surface is completely cleaned; the washer keeps on doing its job.

Step 2:

Repairing the Scratched and Broken Surfaces

The next step to Exterior Painting Melbourne is doing away with cracks and breaches. A brief investigation of the damaged areas of the exterior walls is conducted. Detailed notes on the broken woods and metal, masonry, stucco, and sliding. With the help of a spackle knife, the epoxy filler is applied to the holes and cracks. After it becomes dry, medium-grit sanding block is used light sanding.

Step 3:

Removing the Loose Paint

Once the exterior becomes dry, carry out another investigation and notice the appearance of chipped or loose paint. Placing the drop cloths straight along the ground, then the loose and chipped paint is removed with the help of a medium-grit sanding block or paint scraper.

Step 4:

Sanding and Washing

Rough and unclean surfaces are the prime enemy to the paints – paints will never stick to the untidy surfaces. So cleaning and trimming thoroughly, the surface is left to dry and then sanded. Sanding and scraping are essential and then the loose paint is peeled off so that a solid surface is created for the new paint to firmly stick to.

Step 5:

Trimming the caulk

With the help of exterior caulk gun and caulk, the existing gaps in visible in between the houses are filled. With the help of the same ingredients, the windows and doors are well-trimmed. Caulk is added on the surface met with the different materials, especially at the brick and sidings.

Step 6:

Priming the Stains

Visible stains and wood knots are further examined on the exterior walls. Then a coating of primer is applied with the help of paintbrush which blocks the stains.